LEGRAND IME Delta D2-B - Technical Specifications - Compliance & Insulation; CE Marking, EMC, and Insulation Specs; Glossary of Abbreviations

24
• Technical characteristics
CE Marking
The RDBMRCD230 - RDBMRC24 devices comply:
• with the 2011/65/EU Directive, as amended by the 2015/863 (RoHS 2) Directive.
• with the REACH Regulation (1907/ 2006): at the date of publication of this document no substance in the annex XIV is found
in these products.
• with the RAEE (2012/19/UE) Directive: European Directive on electric and electronic waste.
Electromagnetic compatibility
Tests in accordance with IEC/EN 60947-2 (annex M)
Insulation (IEC/EN 60947-1)
Measurement category: III
Level of pollution: 2
Dielectric rigidity: Power supply / Outputs: 2.2kV
Insulation voltage, Ui:
RDBMRCD230: 250V
RDBMRCD24: 100V
Impulse withstand voltage, Uimp:
RDBMRCD230: 4kV
RDBMRCD24: 2,5kV
• Glossary of abbreviations
IΔ
Instantaneous dierential current
I2
Dierential trip current (mA)
I1
Dierential trip value in % di I2 (Pre-Alarm)
ton2
Trip delay (ms/sec), (TRIP)
ton
Trip delay (ms/sec), (Pre-Alarm)
Idn
Modify the trip value
t
Modify the trip delay
SEt
Settings
On
ON / OFF password setting
FAC
Factory settings
SYS
Not available
InF
Software / Hardware Version
HiS
View or reset the rst stored alarm
CLr
Delete recent history
N.C.
Normally closed (positive safety)
N.O.
Normally open (negative safety)