LEGRAND MyHOME - Operating Modes; Fan-coil Speed

2120
Thermostat with display
Installer manual
5.4 Operating modes
The thermostat can operate in the following modes:
Manual / Automatic.
; Temporary manual.
Comfort; 2 customisable set-points: ideal heating and cooling temperatures
(default 21 – 25°C).
Eco; 2 customisable set-points: saving heating and cooling temperatures
(default 18 – 25°C).
Antifreeze: Minimum safety temperature (default 7°C).
Thermal protection: maximum safety temperature (default 35°C).
Off: zone off (can only be set remotely, or by contact).
With a short pressure (3 seconds maximum) of the MODE key, the system toggles between modes.
5 Functions and operating modes
5.5 Fan-coil speed
If the thermostat is configured for the management of a fan-coil type load, by pressing the FAN
key it is possible to scroll through the fan speeds available, selecting one of the following values.
Press FAN to set the fan speed at the desired level.
Speed 1
Speed 2
Speed 3
Automatic operation