2120
Thermostat with display
Installer manual
Set point
The thermometer icon is not shown, and the unit of
measure of the temperature is in °C.
In OFF mode the display does not show the temperature
detected, but the “- -” symbol.
Note: Using the MyHOME_Suite software it is possible to
switch from °C to °F.
Configuration from central unit
The “CU” symbol indicates that a session with a central unit
or with a supervision software is running.
6.1 Display items
6 Programming
Temperature calibration (see paragraph 6.2).
The thermometer icon flashes quickly to indicate that
calibration is being performed. The unit of temperature is
set to °C.
To Next Page
Loading...
