LEGRAND Tynetec Advent XT2 - NETWORK SETUP; Configuring Network IP Addresses

Doc No. FM0817 issue 1 Page 12
11. NETWORK SETUP
The Network tab is used to setup the Manager’s panel & XT2 IP addresses.
This is an Engineer function only and cannot be accessed with a Manager password.
Press XT2 IP Address and use the on-screen keypad to enter the XT2 IP address e.g. 192.168.168.100
Press Panel IP Address and use the on-screen keypad to enter 192.168.168.101 e.g. the XT2 IP address +1
Press the IP Settings button to view the Windows Network settings.
Press Close when done.