LEGRAND Tynetec Advent XT2 User Manual

Doc No. FM0817 issue 1 Page 15
15. SOFTWARE VERSIONS & COMMANDS
The Version tab is used to check the software version of the Manager’s panel and the XT2 system.
Commands
Only the Restart Panel and Import Database buttons are available with a Manager Logon.
All command buttons are available with an Engineer Logon.
Restart XT2 – restarts the XT2 Controller
Restart Panel – restarts the Manager’s panel Windows application
Reset Programming – resets all Programming settings back to factory defaults
Install Update – updates the Manager’s panel software from USB
Import Database – imports data from a USB drive
Switch Off – turns the Manager’s panel off
Reset Flats – restarts all the intercoms
Press Close when done.

LEGRAND Tynetec Advent XT2 Specifications

General

Brand	LEGRAND
Model	Tynetec Advent XT2
Category	Monitor
Language	English