LEGRAND Tynetec Advent XT2 - ALARM CALL ROUTING PROGRAMMING (CONTINUED); Configuring Alarm Type Sensors; Setting Alarm Routing Times

Doc No. FM0817 issue 1 Page 30
24. ALARM CALL ROUTING PROGRAMMING - CONTINUED
Press Alarm Type 1 and select from the list of options;
Press Alarm Type 2/3/4 and set up to 4 different alarm type sensors from the options listed.
Press Start/End Time and use the keypad to enter the start and end times for the call routing;
Press Rtn on the keypad and buttons for the days of the week will be displayed.