LEHNER SuperVario - Page 25

Operating instructionsSettings and displays
25
Turning down
1. Put the spreader in the carton or put the carton over the spreader
to catch the spreading material.
2. Set the speed of the spreading disc, the speed must be the speed used
inpracticeduetothesuctione󰀨ect.
3. Weigh the ejected spreading material at various slide positions until
the suitable slide position is determined.
Determining the spreading width
1. Spreadonarmsurface.
2. Sweep up and weigh the spreading material.
Formulae
Discharge volume in kg/min x 600
= speed in km/h
Output rate in kg/ha x spreading width in m
Discharge volume in kg/min x 600
= output rate in kg/ha
Speed in km/h x spreading width in m
Output rate in kg/ha x speed in km/h x spreading width in m
=
discharge volume
in kg/min
600
To set your SuperVario® spreader precisely, we recommend using our
LEHNER spreading app. Download this free of charge at: