LEHNER SuperVario - Page 27

Operating instructions
Settings and displays
27
Pressthebuttontoconrmthechoiceofworkingwidth.
Outputratekg/ha"ashes".
Press the + or - button to set the output rate.
Pressthebuttontoconrmtheoutputrateinkg/ha.
The control panel is programmed for automatic operation.
The selected spreading material, the working width,
and the output rate in kg/ha are displayed.
AUTO
Hold the button down for at least 5 sec.
The quantity adjustment is displayed in %.
Here,youcanchangetheoutputrateyourselfifyound
you are using too much or too little.
Press the button.
Speed impulse - - - 1/m is displayed.
Press the + or - button to set the impulses per metre that
areemittedbythetractor(youwillndfurtherinformation
in the tractor's operating manual).