Leica ComGate10 - Power Concept; Comgate10 and Available Accessories

Leica ComGate10, Description of the System
14
2.2.3 Power Concept
Description The Leica ComGate10 works in the low voltage range 12–48 V DC.

• In order to prevent hazards to an operator or other persons and damage to prop-
erty, follow the instructions in chapter "3 Operation" and be sure to observe the
precautions in chapter "1 Safety Directions".
• To ensure the correct functionality of the system use only the delivered structural
monitoring devices from Leica Geosystems and never disassemble or modify the
Leica M-Com series products without any advices from Leica Geosystems.
NOTICE
Unplugging connecting cables from the ComGate10 during a continuous system causes
malfunctions.
2.3 ComGate10 and available accessories
Container for device
and optional acces-
sories
Optional accessories for ComGate10 available:
*) Content of delivered card box
a) Power supply battery cable
b) Antenna for mobile internet (GSM/UMTS/HSDPA/HSUPA/LTE) and WLAN
c) Cable for communication and power supply to the instrument
d) Power supply cable
e) Power supply for mains voltage
f) ComGate10 with DIN mounting*)
g) Quick Start Guide*)
h) USB card manual*)
006176_002
a
b
e
f
h
d
c
g