Leica ComGate10, Safety Directions
9
1.5.2 For the AC Power Supply
DANGER
Missing Ground Connection
If unit is not connected to ground, death or serious injury can occur.
Precautions:
Always ground power cable and power outlet to avoid electric shock.
DANGER
Electric Shock
The product is not designed for use under wet and severe conditions. If unit becomes
wet it may cause you to receive an electric shock.
Precautions:
Use the product only in dry environments, for example in buildings or vehicles. Protect
the product against humidity. If the product becomes humid, it must not be used!
DANGER
Electric Shock
Touching the wet power plug or cord may cause you to receive an electric shock.
Precautions:
Never touch the wet power plug or cord.
DANGER
Fire, Malfunction and Electric Shock
Improper handling of the power plug or cord, for example mechanical damage or heat,
may cause fire, malfunction or cause you to receive an electric shock.
Precautions:
Handle power plug and cord with care.
1.5.3 Repairing of Products
WARNING
Only Leica Geosystems authorised service centres are entitled to repair these prod-
ucts.
1.6 Electromagnetic Compatibility EMC
Description The term Electromagnetic Compatibility is taken to mean the capability of the product
to function smoothly in an environment where electromagnetic radiation and electro-
static discharges are present, and without causing electromagnetic disturbances to
other equipment.
WARNING
Electromagnetic radiation can cause disturbances in other equipment.
Although the product meets the strict regulations and standards which are in force in
this respect, Leica Geosystems cannot completely exclude the possibility that other
equipment may be disturbed.
To Next Page
Loading...