Leica ComGate10, Introduction
2
Introduction
Purchase Congratulations on the purchase of the Leica ComGate10.
This manual contains important safety directions as well as instructions for setting up
the product and operating it. Refer to "1 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
Keep for future reference!
Product Identifica-
tion
The model and serial number of your product are indicated on the type plate.
Always refer to this information when you need to contact your agency or Leica
Geosystems authorised service centre.
Available documen-
tation
Refer to the following resources for all ComGate10 documentation/software:
• the Leica USB documentation card
• https://myworld.leica-geosystems.com
Trademarks • Windows is a registered trademark of Microsoft Corporation in the United States
and other countries
All other trademarks are the property of their respective owners.
Feedback Your feedback is important as we strive to improve the quality of our documentation.
We request you to make specific comments as to where you envisage scope for
improvement.
Please contact your local Leica Geosystems representative to transfer your sugges-
tions.
Leica Geosystems
Address Book
On the last page of this manual, you can find the address of Leica Geosystems head-
quarters. For a list of regional contacts, please visit
http://leica-geosystems.com/contact-us/sales_support.
Validity of this
manual
This manual applies to the ComGate10.
Name Description/Format
Leica
ComGate10
Quick Guide
Provides an overview of the product together with tech-
nical data and safety directions. Intended as a quick
reference guide.
Leica
ComGate10
User Manual
All instructions required in order to operate the product
to a basic level are contained in the User Manual.
Provides an overview of the product together with tech-
nical data and safety directions.
-
To Next Page
Loading...