45
Leica IP C
Instrument Setup 4
1
3
2
Fig. 39
Then fully insert the ink cartridge into the slot.
Note
Puncturing the cartridge seal requires that some force be applied (→ "Fig. 40-1").
1
Fig. 40
Removing the red protective cap
1. Unscrew the red protective cap (→ "Fig. 39-3") all the way.
2. Remove the information flag and place the red protective cap in the recess provided on the ink
cartridge (→ "Fig. 41-1").
3. Upon completion, make sure that the red retaining bracket is in the correct position
(→ "Fig. 41-2") and close the cover plate (→ "Fig. 41-3") of the printer.
To Next Page
Loading...
