Check & Adjust TPS1200+ 95
corrected electronically. This means that the Hz- and V- angles are corrected twice:
first by the determined ATR errors for Hz and V and then by the individual small devi-
ations of the current pointing.
Next step
IF the task is to THEN
adjust a combination of
instrument errors
Refer to "4.3 Combined Adjustment (l, t, i, c and ATR)"
adjust the tilting axis Refer to "4.4 Tilting Axis Adjustment (a)"
adjust the circular level Refer to "4.5 Adjusting the Circular Level of the Instru-
ment and Tribrach"
adjust the laser/optical
plummet
Refer to "4.7 Inspecting the Laser Plummet of the
Instrument"
adjust the tripod Refer to "4.8 Servicing the Tripod"
To Next Page
Loading...
