Why does my LEITZ ICON say the cartridge is empty when it's not?
If your LEITZ Label Maker indicates that the label cartridge is empty despite labels remaining, try opening and closing the cartridge door and checking the information again. If that doesn't work, restart your computer and check the information again.
How to fix LEITZ Label Maker when label cartridge information not displayed?
If the label cartridge information is not displayed on your LEITZ Label Maker, ensure the cartridge is seated properly in the cartridge compartment. Also, make sure the labels are flush with the label exit slot on the label cartridge. Check that the cartridge identification chip is present and undamaged, and ensure the cartridge is loaded properly against the identification chip reader. Finally, make sure the labels are not obstructed in the paper path.
What to do if LEITZ Label Maker says cartridge empty but labels remain?
If the LEITZ Label Maker indicates that the label cartridge is empty but labels remain, verify the details of your label cartridge in the Leitz Icon Control Panel. If that doesn't work, try opening and closing the cartridge door and check the cartridge information again. As a last resort, restart your computer and check the cartridge information again.
Why Wi-Fi network does not appear for LEITZ Label Maker?
If the Wi-Fi network is not appearing for your LEITZ Label Maker, it might be because your router is using channels 12 or 13. Change the router settings to use a channel between 1 and 11 to resolve this issue.
Why does my LEITZ Label Maker lose wireless connection?
If you are experiencing a loss of initial wireless connection with your LEITZ Label Maker, it might be due to your router's default settings. Some routers are set to disconnect devices after a certain period of inactivity. To resolve this, disable the function for disconnecting passive devices or session timeout directly on your router.
What to do if software unable to communicate with LEITZ Label Maker printer?
If the software is unable to communicate with the LEITZ Label Maker printer and the print button is not green, several factors could be at play. First, ensure the printer is receiving power. Then, verify that the correct printer is selected from the printer drop-down list. Check the printer's status in your Windows or Mac printer settings. Confirm that the USB cable is properly connected, or reconnect the printer to the wireless network. Ensure your computer is connected to the wireless network indicated by your printer ID. Finally, verify that the printer driver is correctly configured for your printer.
What to do if LEITZ ICON is out of paper?
If your LEITZ Label Maker is out of paper or label loading has failed, verify that the printer has paper loaded.
How to fix cutter jam on LEITZ ICON?
If your LEITZ Label Maker experiences a cutter jam, remove any jammed labels as instructed.
What to do if LEITZ ICON shows 'invalid or unreadable label cartridge'?
If you are getting an invalid or unreadable label cartridge error on your LEITZ Label Maker, check the cartridge and ensure it is properly inserted.
Why is my LEITZ ICON software not communicating with the printer?
If the software isn't communicating with the LEITZ Label Maker, several factors could be at play. First, ensure the printer has power. Second, confirm that the correct printer is selected in the software's printer drop-down list. Third, check your printer's status in your computer's printer settings (Windows or Mac). Also, check that the USB cable is properly connected, or try reconnecting the printer to the wireless network. Finally, ensure the printer driver is correctly configured. These steps should help resolve the communication issue.
Detailed instructions for inserting and removing label cartridges from the printer.
Guidance on using the Leitz Icon software to create and print various types of labels.
Guidelines for cleaning the printer's exterior, cartridge compartment, and paper path.
Understanding error indicators and steps to resolve label or paper jams.
How to reset the printer and troubleshoot wireless network connection problems.
Resolving issues related to printing and incorrect label cartridge information.
General| Color | No |
|---|---|
| Print technology | - |
| Maximum resolution | 300 x 600 DPI |
| Maximum print height | 910 mm |
| Maximum printing width | 88 mm |
| Product color | White |
| Housing material | ABS synthetics |
| Wi-Fi | Yes |
| USB 2.0 ports quantity | 1 |
| Package depth | 360 mm |
| Package width | 185 mm |
| Package height | 155 mm |
| Package weight | 3100 g |
| LED indicators | Power, WLAN |
Weight and Dimensions| Depth | 129 mm |
|---|---|
| Width | 209 mm |
| Height | 111 mm |
| Weight | 1270 g |
To Next Page
