LEITZ ICON - Using the Leitz Icon Control Panel; Accessing and Navigating the Control Panel

Leitz Icon Printer User Guide Using the Leitz Icon Control Panel
16
Using the Leitz Icon Control Panel
You can use the Leitz Icon Control Panel to connect your printer to your wireless network, view and change your
connection and AirPrint settings, view the status of the printer, and view information about the label cartridge inserted in the
printer.
Accessing the Leitz Icon Control Panel
You can access the Leitz Icon Control Panel from any web browser.
To access the Leitz Icon Control Panel
1.On your computer, search for available wireless networks.
For information on searching for wireless networks, see the documentation for your computer.
2.From the list of available networks, select your printer ID.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of your printer.
3.Click Join or Connect.
4.Once connected, start a web browser on your computer.
5.In the address bar, type 192.168.1.1 and then press Enter.
6.Enter your user name and password in the User name and Password boxes.
The default user name and password are as follows.
User name: Admin
Password: password
See Changing the User Name and Password on page 18 for information on changing the user name and password.
7.Click OK.
The Leitz Icon Control Panel is displayed.
NOTE
If the label on the bottom of your printer does not contain the Printer ID, you can determine the Printer ID using the printer’s
MAC address. In this case, the Printer ID is formatted as ICON-xxyyzz, where xxyyzz is the last six characters of your
printer’s MAC address (found on the label on the bottom of your printer). For example, if your printer’s MAC address is
MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.