Leitz Icon Printer User Guide Technical Information
30
notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS
PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.”
Third party copyrighted software also includes Zero configuration, Copyright © Zero configuration authors, licensed under
the Microsoft Public License, which is available for review at https://zeroconf.codeplex.com/license.
Third party copyrighted software also includes Zint Barcode Generator, Copyright © Zint Barcode Generator authors,
licensed under the terms of the GPL v3. Only the contained backend (aka ZINT shared library) is licensed under BSD 3.
Third party copyrighted software also includes UAC self-elevation, Copyright © UAC self-elevation authors, licensed under
the Microsoft Limited Public License, which is available for review at https://msdn.microsoft.com/en-us/cc300389.aspx.
With respect solely to the third party software, no warranty (either expressed or implied) is provided, to the extent permitted
by applicable law. Copying, distribution, and modification of the third party software is solely at your own risk and is subject
to the terms of its License. Esselte is not responsible for any such modification. Esselte reserves the right to not support
any product in which you have or have attempted to modify software supplied by Esselte.
Safety Information
Intended Use
This device has been developed for printing labels and similar items using Leitz Icon Intelligent Label Cartridges. The
printer should be used only for this purpose, as described in this user guide.
Precautions for Setup
• The printer is for indoor use only. Do not use outdoors.
• The printer power adapter is designed for 100 - 240 V, 50/60 Hz. Verify the outlet voltage is within this range before
plugging in your power adapter.
• Place the device close to an accessible power outlet. Make sure the power cord can be easily disconnected from the
power outlet at all times.
• Protect the power cord and the power adapter from being strained, pinched, or buckled.
• Place the cord out of walkways to prevent people from tripping over the cord.
• Use only the power adapter provided with the printer. Use of an incorrect power adapter may cause overheating or fire.
• Do not bend or place a heavy object on the power cord as it could damage the cord and result in risk of electric shock
or fire.
• Do not use the power cord if damaged or frayed.
• Be sure to hold only the connector end of the power cord when disconnecting. Repeated pulling on the cord could
damage the cord.
Precautions for Operation
• Protect the printer from moisture and do not operate if power cord or plug are defective.
• Never touch a power plug with wet hands.
• Do not place anything on top of the printer and do not insert anything into the label exit slot.
• Never insert objects of any kind into the printer as they may harm the mechanisms or electrical components within the
printer.
• Never spill liquid of any kind on the printer.
• Do not use the printer near water or in extreme humidity.
• Do not drop or hit the printer.
To Next Page
Loading...
