LEITZ ICON - Network Configuration and AirPrint; Printer Status and Cartridge Information

Leitz Icon Printer User Guide Using the Leitz Icon Control Panel
17
Connecting the Printer to Your Wireless Network
1.In the Leitz Icon Control Panel, click Wi-Fi Setup Wizard.
2. Click Connect to Existing Network.
The Select Your Wireless Network page is displayed.
3. Select your wireless network in the Available Networks list.
4. If prompted, enter your network password and then click OK.
5. Click Next.
The Connection Settings page is displayed with the most common, default setting selected.
6. Unless you are performing an advanced installation needing a specific static IP address, click Next to use the default
settings.
7. On the Confirm & Connect page, click Connect.
As the printer connects to the selected network, you may hear a noise as the printer resets. At the same time, the
wireless connection from your computer to the printer is dropped and you will need to reconnect your computer to
your wireless network.
8. Close the Leitz Icon Control Panel.
Viewing the Printer Status
The Printer Status page displays the network status and settings for the printer.
To view the printer status
 In the Leitz Icon Control Panel, click Printer Status.
The Printer Status page is displayed.
Changing the Network Settings
You can make changes to the network settings using the Setup Wizard.
To change the network settings
1.In the Leitz Icon Control Panel, click Wi-Fi Setup Wizard.
The Setup Wizard starts and guides you through the process of changing your settings.
2.Follow the instructions in the wizard to change your network settings.
3.Click Connect to save the changes and connect to your network using the new settings.
Using AirPrint
You can use AirPrint to print to the Leitz Icon printer from your iOS device. AirPrint is enabled by default. You can change
the AirPrint settings or disable AirPrint using the Leitz Icon Control Panel.
To change the AirPrint settings
1.In the Leitz Icon Control Panel, click AirPrint Settings.
The AirPrint Settings page is displayed.
2.Make any desired changes to the network settings.
3.Click Save.
To disable AirPrint on the printer
 In the Leitz Icon Control Panel, clear the Enable AirPrint to allow printing from iPhone/iPad and other iOS devices
check box.
NOTE
To set up your printer with AirPrint, your printer must be first be connected to your wireless network.
NOTE
One common change to the AirPrint settings is to change the printer name if the printer is used at a location where there are
multiple Leitz Icon printers in use. This makes it easy to identify your Leitz Icon printer