29
− Swivel down the canister rinsing nozzle
(10).
− Close the cover (4) and put the lever
(11) in the “canister rinsing ON” position.
− Put the agitation nozzle, boundary
wetting and canister rinsing in the “OFF”
position.
− Put the induction valve (8) in the
“induction OFF” position when all the
liquid from the chemical inductor has
been inducted.
− Put the distribution valve (5) in the
“spraying” position.
− When the main tank has been filled as
required, put the filling valve in the
“suction from selection valve” position.
− Agitate the content of the main tank.
8
3
To Next Page
Loading...