Lennox CHA16 - A7 diagram with B2 diagram ECH16-185;255;275;300 45 kW 460 V & 575 V Sequence; Operation Sequence: A7 Section and B2 Sections (45 kW 460 V or 575 V electric heat wired to CHA16-1853); 1- 1 st stage heating demand closes W1...; 2- When K15-1 closes, heating elements HE1 and HE2 are both energized...

Page 75
A7diagram
with B2 diagram
ECH16-82/95/135/160 40kW 460V & 575V Operating Sequence
Operation Sequence: A7 Section and B2 Sections
(40kW 460V or 575V electric heat wired to CHA16-1603)
1- 1st stage heating demand closes W1. W1 passes through primary limits S15 to energize contac
tor K15 and relay K9. K151 contacts close and K91 and K92 both switch.
2- When K151 closes, heating elements HE1 are energized. The elements are arranged in a
Wye" configuration for 460V or 575V operation.
3- When K91 switches, indoor blower contactor K3 is energized. When K92 switches, time delay
DL2 is enabled (circuit is closed to W2).
4- When K3 is energized, the indoor blower is powered (and optional economizer opens to mini
mum position when K32 contatcs close).
5- Additional heating demand W2 passes through K92 to energize time delay DL2.
6- DL2 closes after 30 seconds. Contactor K16 is energized.
7- When K161 closes, heating elements HE2 and HE3 are energized.