CLIMATIC™50 – IOM – Rooftops/ Aircoolair CL50-ROOFTOPS-IOM-1107-E
3
INTRODUCTION
CLIMATIC™50
The new generation of microprocessor based control, CLIMATICTM 50 may be fitted to the Lennox Roof-Top or
AirCooler range. It inherits 20 years of technology and field operating experience from its predecessors the
CLIMATICTM1 and CLIMATICTM 2.
LENNOX has found the latest hardware technology available on the market place and developed a software
specifically designed for Roof-Top and AirCooler applications, maximising the LENNOX units efficiency and
performance.
Compatibility
This documentation is compatible with the programs Roof Top and AirCooler:
• Ranges Baltic, Flexy I, Flexy II, FX and AC, starting from the version 20.0
Warning
Any parameter modification should be carried out by trained and licensed competent technician.
Before start-up or restart of a unit controlled by Climatic 50, it is mandatory to check adequacy between
Climatic 50 and the unit with its options.
• 38xx menus for unit and options
• 39xx menux for communication
In case of wrong parameters, I/O links could be incorrect and may create some operation problems for
the units and ultimately breakdowns.
Lennox cannot be held responsible for any claims on the units due to a wrong parameters sequence or a
parameters modification carried out by non competent technicians. In this case, the warranty will be
legally null and void.
To Next Page
Loading...