58
CLIMATIC™50 – IOM – Rooftops/ Aircoolair CL50-ROOFTOPS-IOM-1107-E
58
T.15
T.16
T.17
T.15 Master/Slave functions
‘#’ Hot/Cold Limitation; ‘#’ Hot master; ‘#’ Cold master
‘#’ Limitation of compressors; number of compressors running
‘#’ Back-up mode; Number of stand-by unit
T.16 Operating time
Press button ‘‘ to position the cursor over the counter number.
With button
!or # enter the desired counter number
Press button ‘.’ to change the field
To reset all the operating times to zero, select ‘Yes’ in the ‘Clear’ field
Indicates the date and time of the start of memorisation.
MD0 BM50 switched on
MD1 In Dead Zone
MD2 In Cold Zone
MD3 In Hot Zone
MD4 Z.A
MD5 Z.B
MD6 Z.C
MD7 Uno
MD8 BMS
MD9 Ventilation
MD10 Damper set to Min Fresh Air Without Compressor
MD11 Damper set to Min Fresh Air With Compressor
MD12 Damper in Free Cooling Without Compressor
MD13 Damper in Free Cooling With Compressor
MD14 Circuit 1 & Compressor 1 Cold with Min Fresh Air
MD15 Circuit 1 & Compressor 1 Cold with Free Cooling
MD16 Circuit 1 & Compressor 1 Hot
MD17 Circuit 1 & Compressor 1 Defrosting
MD18 Circuit 1 & Compressor 2 Cold with Min Fresh Air
MD19 Circuit 1 & Compressor 2 Cold with Free Cooling
MD20 Circuit 1 & Compressor 2 Hot
MD21 Circuit 1 & Compressor 2 Defrosting
MD22 Circuit 2 & Compressor 1 Cold with Min Fresh Air
MD23 Circuit 2 & Compressor 1 Cold with Free Cooling
MD24 Circuit 2 & Compressor 1 Hot
MD25 Circuit 2 & Compressor 1 Defrosting
MD26 Circuit 2 & Compressor 2 Cold with Min Fresh Air
MD27 Circuit 2 & Compressor 2 Cold with Free Cooling
MD28 Circuit 2 & Compressor 2 Hot
MD29 Circuit 2 & Compressor 2 Defrosting
MD30 Circuit 3 & Compressor 1 Cold with Min Fresh Air
MD31 Circuit 3 & Compressor 1 Cold with Free Cooling
MD32 Circuit 3 & Compressor 1 Hot
MD33 Circuit 3 & Compressor 1 Defrosting
MD34 Circuit 4 & Compressor 1 Cold with Min Fresh Air
MD35 Circuit 4 & Compressor 1 Cold with Free Cooling
MD36 Circuit 4 & Compressor 1 Hot
MD37 Circuit 4 & Compressor 1 Defrosting
MD38 Supplementary heating 25%
MD39 Supplementary heating 50%
MD40 Supplementary heating 75%
MD41 Supplementary heating100%
T.17 DM50 Loop
(Option)
Displays the rotation of the cards on request from the DM50
To Next Page
Loading...