icomfort Touch 7−Day Programmable Communicating Thermostat
Page 13
Setting up a custom program
On the Home screen, press the press for more area to go to the dash-
board; then press the program tab. Using this screen (figure 21), you
can select program ON or OFF, view /edit the current program (figure
22), or you can restore the original energy saving program. If you select
restore, a confirm screen will appear as shown in the lower half of figure
21.
program ON
program OFF
select
press select to turn the program schedule ON or OFF
do you want to view or
edit the current program?
view/edit
do you want to restore the original
energy saving program??
restore
please press confirm" to restore the schedule to the
default energy saving program.
confirm
pressing confirm will erase
any saved custom schedules
cancel
Figure 21. Accessing the program screen
The original energy saving program will always remain in memory and
can be restored at any time.
To program your own schedule, press view/edit − a screen similar to fig-
ure 22 will appear. Shown below is the energy efficient heating and cool-
ing schedule and is the same for every day of the week. Press new to
begin a new schedule.
the following program settings have been saved
press a program to edit it
press NEW to create a program
mon, tue,
wed, thur,
fri, sat,
sun
heat __
cool
time __
6:00
AM
8:00
AM
5:00
PM
10:00
PM
70
78
fan __ auto auto auto auto
70
78
62
85
62
82
program ON
program OFF
select new
press to edit
HOME
HELP
press to edit
Figure 22. Energy efficient heating & cooling schedule
To Next Page
Loading...
