icomfort Touch 7−Day Programmable Communicating Thermostat
Page 9
Setting/adjusting indoor temperature from HOME screen
Temperature changes may be made from the HOME screen at any time,
if the homeowner wishes.
Program NOT on
If the program is NOT on, change temperature by pressing an up or down
arrow until the heat to" (or cool to") number is at the desired tempera-
ture. This setting will remain until you decide to change it again.
use arrows to
change temperature
Figure 13. Adjusting temperature without program running
Program ON
If the program is ON, change temperature by pressing an up or down ar-
row until the heat to" (or cool to") number is at the desired temperature.
While doing so, the set hold menu appears, giving a list of options you
can choose. Make your selections as described in figure 14.
use arrows to change
temperature
select a set hold period
for the changed temper-
ature
press set when temper-
ature and hold period
are selected
Figure 14. Adjusting temperature with program running
After a hold is set, the set hold options and buttons will disappear and a
message will state when the hold expires, along with a cancel option
should you choose to revert back to the program (figure 15).
Figure 15. HOLD reminder
To Next Page
Loading...
Need help?
General
