icomfort Touch 7−Day Programmable Communicating Thermostat
Page 15
Setting up a custom program (continued)
Press any of the boxes to highlight it (e.g., 8:00 AM box in figure 24).
Then use the up/down arrows to change the selected box.
Repeat with all boxes to select your preferred comfort levels, event start
times, and fan operation mode.
Skipping an event
Using figure 24 as an example, if you wanted the same settings to be in
effect from 6:00 AM until 5:00 PM, rather than change all the 8:00 AM set-
tings to match the 6:00 AM settings, simply press and hold the 8:00 AM
button until all the settings and the boxes grey out". Effectively, this
changes the thermostat from a 4−event−per−day to a 3−event−per−day
thermostat.
To turn the event back on, press and hold the same time button until the
boxes and settings are solid again.
After making any changes to this screen, a save button will appear.
Press save to exit the screen and save your changes to a new custom
program file.
8:00
AM
6:00
AM
5:00
PM
10:00
PM
auto auto auto auto
70 62 70 62
time
heat
temp
cool
temp
fan
schedule for mon, tue, wed, thu, fri
press and hold a time
button to turn an
individual setting on/off
78 85 78 82
cancelsave
HOME
HELP
Figure 24. Edit the schedule
To Next Page
Loading...
