EasyManua.ls Logo

Lennox icomfort Touch Thermostat - Clearing and Confirming Alerts; Clearing Service Reminders; Setting New Alert Date Post-Clear

Lennox icomfort Touch Thermostat
20 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
506053−01 12/10
Page 20
Alerts (continued)
Using clear"
Press clear (not available if Critical Alert) to request clearing of a service
reminder. If you answer no to the Action taken confirmation" screen (fig-
ure 35), the alert is not cleared. Action must be taken, either to perform
the maintenance required, or instead of clearing, you may edit the time to
again be reminded as described under Using remind later".
yes no
(Replace Filter 2)
Was action taken?
Figure 35. Action taken confirmation
If you confirm action was taken, the Set new alert date" screen (figure
36) appears. You may chose from the list of options or set a custom time
(see figure 34).
set date and time for next
reminder
disabled
3 months
6 months
12 months
24 months
custom time
Alert 4 of 5
Service Alert Code: 0
SYSTEM reports:
Filter 2 Timer Expired
2 Occurrences
10/16/09
9:33 AM
select
cancelset
Alert 4 of 5
Service Alert Code: 0
SYSTEM reports:
Filter 2 Timer Expired
2 Occurrences
9/16/09
9:33 AM
done
alert cleared
Figure 36. Set new alert date
Press done to return to the device alert screen (figure 31, page 18).
Date Revision description
09−2010 Standardized product nomenclature.
Add unlock section on page 2
Add turning on outdoor temp and indoor humidity display
12−2010 Add icomfort logo and update registered trademarks.

Related product manuals