Lennox Prodigy 2.0 User Manual

Page 92
Table 59. Menu Interface (Level 1 - SERVICE)
Note: Available menu options are dependent on hardware configuration.
Level 1 Level 2 Level 3
Use the Adjust and set values
arrows to scroll up or down for
selection options.
WHEN SELECTED (PRESS BACK TO RETURN TO
THE PREVIOUS MENU)
SERVICE
TEST
COOL
OPTIONS ARE COOL 1, COOL
2, COOL 3 AND COOL 4.
COOL X ON
RAT: XX.X F
DAT: XX.X F
OR
NOT APPLICABLE EQUIPMENT NOT PRESENT
HEAT
OPTIONS ARE HEAT 1, HEAT
2, HEAT 3 AND HEAT 4.
HEAT X ON
RAT: XX.X F
DAT: XX.X F
OR
NOT APPLICABLE EQUIPMENT NOT PRESENT
BLOWER
BLOWER ON
BLOWER TEST AIRFLOW: NO = XX %
DAMPER
POSITION
ACTUAL: 0.1%.
NOTE: THIS FUNCTION IS ONLY AVAILABLE IF CON
FIGURATION ID 1, POSITION 2 HAS BEEN CON
FIGURED.
POWER EXHAUST POWER EXHAUST ON OR NOT PRESENT
FANS
OPTIONS ARE FAN 1, 2, 3, 4,
5 OR 6
FAN X ON OR NOT APPLICABLE EQUIPMENT NOT
PRESENT
DEHUMIDIFIER
OPTIONS ARE
DEHUMIDIFIER 1 AND
DEHUMIDIFIER 2
WHEN SELECTING OPTION, RESPONSE WILL BE
EITHER DEHUMIDIFIER X ON OR NOT APPLICABLE
EQUIPMENT NOT PRESENT.
OUTPUTS SERVICE RELAY SERVICE RELAY ON
REPLACE
FILTER RESET RUNTIME? = NO OR YES
BELT
(only available based
on model number)
RESET RUNTIME? = NO OR YES
UV LAMP RESET RUNTIME? = NO OR YES OR NOT APPLICABLE EQUIPMENT NOT PRESENT
FANS (1 through 6) RESET RUNTIME? = NO OR YES OR NOT APPLICABLE EQUIPMENT NOT PRESENT
BLOWER RESET RUNTIME? = NO OR YES
COMPRESSOR (1
through 4)
RESET RUNTIME? = NO OR YES OR NOT APPLICABLE EQUIPMENT NOT PRESENT
REPORT
USB SERVICE
REPORT
USB SERVICE REPORT = DEFAULT VALVE IS THE SERIAL NUMBER IF SET. OTHER
WISE IT WILL BE 123456789. CAN BE RENAMED BY USER. MAXIMUM 18 CHARAC
TERS.
USB ADV AIRFLOW
RPT
USB ADVANCED AIRFLOW
REPORT = START USB RE
PORT OR USB REPORT
DONE.
START USB REPORT = SAF_RPT (DEFAULT) AND
CAN BE RENAMED BY USER. MAXIMUM 18 CHAR
ACTERS.
SAVE USER
PROFILE
SAVE USER PROFILE = YES OR NO
LOAD USER
PROFILE
LOAD USER PROFILE = YES OR NO
USB PROFILE SAVE
USB PROFILE SAVE = 1234 UNLESS CATALOG NUMBER IS SET. DEFAULT IS CATA
LOG NUMBER. CAN BE RENAMED BY USER. MAXIMUM 18 CHARACTERS.
USB PROFILE LOAD
USB PROFILE LOAD =
1234XXXXXXXXXXX (USER
ASSIGNED NAME AS SPE
CIFICED. TYPICALLY CATA
LOG NUMBER.
WILL LOAD PREVIOUSLY SAVED USB PROFILE.
LOAD FACTORY
PROF
LOAD FACTORY PROF = YES OR NO
LOG SERVICE
EVENT
LOG SERVICE EVENT = YES OR NO

Lennox Prodigy 2.0 Specifications

General

Brand	Lennox
Model	Prodigy 2.0
Category	Controller
Language	English