Lennox Prodigy 2.0

Page 95
Page 95
Table 60. Menu Interface (Level 1 - SETTINGS)
Note: Available menu options are dependent on hardware configuration.
Level 2
USE THE ADJUST AND SET VALUES AR
ROWS TO SCROLL UP OR DOWN FOR SE
LECTION OPTIONS.
Level 5Level 4Level 3
INSTALL
NEW UNIT SETUP
LANGUAGE = ENGLISH, ESPANOL, OR FRANCAIS.
DATE/TIME = DAY, MONTH, YEAR, HOURS, MINUTES, SECONDS
DISPLAY UNITS F/C (FAHRENHEIT / CELSIUS)
MODEL NUMBER = LOCATED ON UNIT NAMEPLATE.
CONFIGURATION ID 1 = WHITE STICKER TITLED “ORIGINAL FACTORY UNIT CONFIGURATION”
LOCATED ON THE RIGHT SIDE OF THE CONTROL BOX NEAR THE M3 CONTROLLER.
CONFIGURATION ID 2 = WHITE STICKER TITLED “ORIGINAL FACTORY UNIT CONFIGURATION”
LOCATED ON THE RIGHT SIDE OF THE CONTROL BOX NEAR THE M3 CONTROLLER.
CATALOG NUMBER = LOCATED ON UNIT NAMEPLATE.
SERIAL NUMBER = LOCATED ON UNIT NAMEPLATE.
RTU DESCRIPTION = (18 CHARACTER POSITION)
DEHUMIDIFIER SENSOR
TYPE
= NONE OR REHEAT DI4
= LOCAL SENSOR
OR NETWORK
SENSOR
DEHUMIDIFIER DEHUMID SETPOINT = XX.X %
DEHUMIDIFIER DEHUMID DEADBAND = X.X %
INSTALL NEW M3 CLEAR ALL CONFIG=YES OR NO. IF YES IS SELECTED. ARE YOU SURE?=YES OR NO.
GENERAL
LANGUAGE = ENGLISH, FRANCAIS OR ESPANOL
DATE/TIME
DAY, MONTH, YEAR HOURS, MINUTES AND SECONDS
NOTE: HOURS IN 24 HOUR CLOCK FORMAT (MILITARY)
DISPLAY UNITS F/C = FAHRENHEIT OR CELSIUS
RTU DESCRIPTION ENTER A 18 POSITION ALPHA / NUMERIC NAME
CATALOG NUMBER = LOCATED ON UNIT NAMEPLATE.
MODEL NUMBER = LOCATED ON UNIT NAMEPLATE.
SERIAL NUMBER = LOCATED ON UNIT NAMEPLATE.
CONFIGURATION ID
1
= WHITE STICKER TITLED “ORIGINAL FACTORY UNIT CONFIGURATION” LOCATED ON THE
RIGHT SIDE OF THE CONTROL BOX NEAR THE M3 CONTROLLER.
CONFIGURATION ID
2
NOTE: PARAMETERS AVAILABLE ARE DEPENDENT ON MODEL NUMBER AND CONFIGURATION ID 1 AND 2 SETTINGS. IN ORDER FOR
ANY CHANGE TO THE SYSTEM TO TAKE AFFECT, BACK COMPLETE OUT OF THE CURRENT LOCATION TO THE MAIN MENU OR STATUS
SCREEN.