Lennox RG10F2-MMA - COOL Mode Operation; DRY Mode Operation; HEAT Mode Operation

7
DRY Mode
1. Press the MODE button to select
D RY.
2. Set the target temperature using the
TEMP or TEMP button.
3. Press the ON/OFF button to start the
unit. FAN SPEED cannot be changed
in DRY mode.
1
3
2
HEAT Mode
1. Press the MODE button to select
HEAT mode.
2. Set the target temperature using the
TEMP or TEMP button.
3. Press FAN button to select the fan
speed: AUTO, LOW, MED, HIGH
4. Press the ON/OFF button to start the
unit.
NOTE: As outdoor temperature drops,
the performance of the unit’s
HEAT function may be aected.
In such instances, Lennox
recommends using this unit in
conjunction with other heating
appliances.
1
3
2
4