Lennox RG10F2-MMA User Manual

9
• SWING
Not applicable for this unit.
• SHORTCUT
Press Shortcut and the system
automatically reverts to the previous
settings (including Operating Mode,
Setting Temperature, Fan Speed Lev-
el, and Sleep Feature, if set).
NOTE: If the Shortcut button is pressed
for longer than two seconds, the
system automatically restores the
current operation settings.
• °C/°F
Press °C/°F to alternate the tem-
perature display between celcius and
farenheit.
• LED Display
Press the LED button to turn on and
o󰀨 the LED display on the indoor unit.
• SLEEP
Press the Sleep button to decrease
the unit’s energy usage. This function
is benecial for users who do not
require the same temperature settings
to stay comfortable while sleeping.
Only the remote controller can acti-
vate the Sleep function.
NOTE: The Sleep function is not
available in FAN or DRY mode.
• LOCK
Press LED and °C/°F simultaneously
for ve seconds to activate the Lock
function. Once locked, all buttons lose
functionality. To restore functionality,
press LED and °C/°F simultaneously
for two seconds.
• SET
Press the SET button to enter the
function setting. Press SET, TEMP
or TEMP to select the target func-
tion. The selected symbol will ash on
the display area, press the OK button
to conrm.
To cancel the selected function, press
SET, TEMP or TEMP to locate
the function to cancel. After locating
the system function, press OK to
cancel it.
• I SENSE
Enables the remote controller to
measure the temperature at its
current location and send this signal
to the unit every three minutes. When
using AUTO, COOL or HEAT modes,
measuring ambient temperature from
the remote controller (instead of from
the indoor unit itself) enables the unit
to optimize the temperature to ensure
maximum comfort.
Advanced Functions

Lennox RG10F2-MMA Specifications

General

Brand	Lennox
Model	RG10F2-MMA
Category	Controller
Language	English