Lenovo PHAB Plus
55
1100 Sub board
For access, remove the following FRUs:
• “1010 Rear cover with speaker” on page 34
• “1090 Vibrator motor” on page 53
and
Detach the following FPC from the main board:
• Battery FPC (see Step 1 on page 37 in “1020 Battery pack”)
1. Detach the antenna cable from its connector on the sub board using a pair of
tweezers.
Figure 10-1. Detaching the antenna cable (sub board side)
2. Detach the connector of the main FPC from the sub board.
Figure 10-2. Detaching the connector of the main FPC (sub board side)
To Next Page
Loading...
