Statement 37
DANGER
When you populate a rack cabinet, adhere to the following guidelines:
• Always lower the leveling pads on the rack cabinet.
• Always install the stabilizer brackets on the rack cabinet.
• Always install the heaviest devices in the bottom of the rack cabinet.
• Do not extend multiple devices from the rack cabinet simultaneously, unless the rack-mounting
instructions direct you to do so. Multiple devices extended into the service position can cause
your rack cabinet to tip.
• If you are not using the IBM 9308 rack cabinet, securely anchor the rack cabinet to ensure its
stability.
Rack Safety Information, Statement 2
DANGER
• Always lower the leveling pads on the rack cabinet.
• Always install stabilizer brackets on the rack cabinet.
• Always install servers and optional devices starting from the bottom of the rack cabinet.
• Always install the heaviest devices in the bottom of the rack cabinet.
UL regulatory information
This device is for use only with Listed CONREF_to_boilerplate_terms.
Attention: This product is suitable for use on an IT power distribution system whose maximum phase-to
phase-voltage is 240 V under any distribution fault condition.
© Copyright Lenovo 2016, 2018 xvii
To Next Page
Loading...
