Operating temperatures inside the enclosure drawers can reach up to 60°C. Take care when opening
drawers and removing drive carriers.
Figure 4. Hot Surface Warning Label
CAUTION:
Due to product acoustics, it is recommended that users wear ear protection for any prolonged
exposure.
Figure 5. PSU Warning Label
Before removing a module, disconnect all power cords and cables.
Open drawers must not be used to support any other equipment.
Figure 6. Drawer Caution Label
Electrical Safety
• The enclosure must only be operated from a power supply input voltage range of 200 VAC to 240 VAC, 50
Hz to 60 Hz.
• Provide a suitable power source with electrical overload protection to meet the requirements in the
technical specification.
• The power supply cord must have a safe electrical earth connection. Check the connection to earth of the
enclosure before you switch on the power supply.
Important: The enclosure must be grounded before applying power.
• The plug on the power supply cord is used as the main disconnect device. Ensure that the socket outlets
are located near the equipment and are easily accessible.
Chapter 1. Safety Guidelines 3
To Next Page
Loading...
