Figure 34. 2.5" to 3.5" Cabrio Drive Carrier Adapter
Note: For information about the LEDs of 3.5" drive carrier module, refer to Figure 56 “3.5" Drive Carrier
LEDs ” on page 54
Drive Status Indicators
Green and amber LEDs on the front of each drive carrier module indicate disk drive status; shown in Figure
35 “Dummy Drive Carrier Module ” on page 29. The SEP (Storage Enclosure Processor) controls these LEDs.
Refer to “Drive Carrier Module LEDs” on page 54 about these LEDs’ states.
Dummy Drive Carrier Modules
Dummy drive carrier modules are provided and must be put in all empty drive bays to create a balanced
airflow.
Figure 35. Dummy Drive Carrier Module
Chapter 2. System Overview 29
To Next Page
Loading...
