– Two sliding drawers containing Disk Drive In Carrier (DDIC) modules.
– An operator’s (Ops) panel.
– A front bezel.
– A midplane PCB into which other components connect.
– Four sideplanes and six baseplanes for front end components connectivity.
• Two Power Supply Units (PSUs).
• Five cooling modules.
• Two ESMs.
• Up to 84 Disk Drive In Carrier (DDIC) modules.
• A rail kit for rack mounting.
• A T20H screwdriver for anti-tamper lock.
Figure 18. Module Locations
Chapter 2. System Overview 15
To Next Page
Loading...
