c.
Click Collect.
Ê The file is saved in the Downloads folder for your browser with the name,
*configurationData-<arrayName>-<dateTime>.7z*.
◦ Alternatively, you can back up the configuration database by using the following CLI
command:
a.
Download SMcli from ThinkSystem System Manager and set up SMcli command
execution environment.
b.
Execute the following SMcli command：
save storageArray dbmDatabase
sourceLocation=onboard contentType=all file="filename";
In this command, filename is the file path to which you want to save the database.
Enclose the file name in backslash following double quotation marks (\"). For example:
file="C:\Program Files\CLI\logs\dbmdata.zip"
This command does not automatically append a file extension to the saved file. You
must specify a file extension when entering the file name.
Notes:
▪ Under PowerShell, enclose the file name following two quotation marks(""), for
example,
file=\""data.zip\"".
▪ Execution environment requires setting JAVA_HOME environment variable, and
JRE8 or later.
▪ See Command Line Interface (CLI) Reference and follow the complete command
syntax for this operation
4.
Collect support data for your storage array using ThinkSystem System Manager.
a.
Select Support › Support Center › Diagnostics.
b.
Select Collect Support Data.
c.
Click Collect. The file is saved in the Downloads folder for your browser with the name,
support-data.7z.
5.
If the controller is not already offline, take it offline now using either ThinkSystem System
Manager or the SMcli tool.
◦ From ThinkSystem System Manager:
a.
Select Hardware.
b.
If the graphic shows the drives, select Show back of shelf to show the controllers.
c.
Select the controller that you want to place offline
d.
From the context menu, select Place offline, and confirm that you want to perform the
operation.
4
To Next Page
Loading...
Need help?
General