(1) Host interface card (HIC)
(2) Thumbscrews
7.
Place the HIC on a static-free surface.
6.3.6. Step 4: Install host interface card
Install the new host interface card (HIC) to increase the number of host ports in your storage array.
Possible loss of data access — Never install a HIC in a DE2000H or DE4000H
controller canister if that HIC was designed for another DE Series controller. In
addition, if you have a duplex configuration, both controllers and both HICs must
be identical. The presence of incompatible or mismatched HICs will cause the
controllers to lock down when you apply power.
Steps
1.
Unpack the new HIC and the new HIC faceplate.
2.
Using a #1 Phillips screwdriver, remove the four screws that attach the HIC faceplate to the
controller canister, and remove the faceplate.
108
To Next Page
Loading...
