If you have… You must…
DA volumes in the default cluster Remap all the DA volumes in the default
cluster.
•
If you do not want to share DA volumes
between hosts, follow these steps:
a.
Create a host partition for each set of
FC host ports (unless this has already
been done).
b.
Remap the DA volumes to the
appropriate host ports.
•
If you want to share DA volumes between
hosts, follow these steps:
a.
Create a host partition for each set of
FC host ports (unless this has already
been done).
b.
Create a host cluster that includes the
appropriate host ports.
c.
Remap the DA volumes to the new
host cluster.
This approach
eliminates volume
access to any
volumes that remain
in the default cluster.
130
To Next Page
Loading...
