Lenovo ThinkSystem DE Series - Page 145

Starting configuration Ending configuration Feature
Code
Controller
submodel
ID
Baseboard
ports
HIC ports Controller
submodel
ID
Baseboard
ports
HIC ports
428 FC FC 429 iSCSI FC B4DK
428 FC FC 430 FC iSCSI B4XU
428 FC FC 431 iSCSI iSCSI B4G7
429 iSCSI FC 428 FC FC B4DL
429 iSCSI FC 430 FC iSCSI B4XW
429 iSCSI FC 431 iSCSI iSCSI B4XY
430 FC iSCSI 428 FC FC B4XV
430 FC iSCSI 429 iSCSI FC B4XX
430 FC iSCSI 431 iSCSI iSCSI B4Y0
431 iSCSI iSCSI 428 FC FC B4XT
431 iSCSI iSCSI 429 iSCSI FC B4XZ
431 iSCSI iSCSI 430 FC iSCSI B4LZ
◦ For the controller that does not have two base-board ports on the rear:
DE2000H, DE4000H and DE4000F
No feature code is available for DE2000H, DE4000H and DE4000F.

If your Controller submodel ID is not listed, contact Lenovo Data Center Support.
1.
In System Manager, locate the Feature Enable Identifier.
a.
Go to Settings > System.
b.
Scroll down to Add-ons.
c.
Under Change Feature Pack, locate the Feature Enable Identifier.
d.
Copy and paste this 32-digit number to a text file.
138