7.3.1. Complete FC to iSCSI conversion
If you converted all host ports from FC to iSCSI, you must configure iSCSI networking.
Steps
1.
Configure the switches.
You should configure the switches used to transport iSCSI traffic according to the vendor’s
recommendations for iSCSI. These recommendations might include both configuration
directives as well as code updates.
2.
From ThinkSystem System Manager, select Hardware › Configure iSCSI ports.
3.
Select the port settings.
You can set up your iSCSI network in many ways. Consult your network administrator for tips
on selecting the best configuration for your environment.
4.
Update the host definitions in ThinkSystem System Manager.
If you need instructions for add hosts or host clusters, refer to the online help
for ThinkSystem System Manager.
a.
Select Storage › Hosts.
b.
Select the host to which the port will be associated, and click View/Edit Settings.
The Host Settings dialog box appears.
c.
Click the Host Ports tab.
142
To Next Page
Loading...
