Figure 47. Removing the fan cage assembly
Step 3. Lift the fan cage assembly to remove it.
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the fan cage assembly
Follow instructions in this section to install the fan cage assembly.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
S017
Chapter 4. Hardware replacement procedures 131
To Next Page
Loading...
