CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Go over “Installation Guidelines” on page 107 to ensure that you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. Align the fan cage assembly to the guides on both sides of the server, and lower it into the server.
Figure 48. Installing the fan cage assembly
Step 2. Rotate the fan cage release latches down until they stop.
After this task is completed
Proceed to complete the parts replacement (see “Complete the parts replacement” on page 218).
132 ThinkSystem SR850 V2 Maintenance Manual
To Next Page
Loading...
