• Go over “Installation Guidelines” on page 107 to ensure that you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure. A video of this procedure is available from the following links:
•
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C6QgmsUMRG6ul0bHzrGmsG
• https://list.youku.com/albumlist/show/id_54461099
Procedure
Step 1. Place the system board above the front VGA and diagnostics assembly, and slide the board right
and forward into the chassis.
Figure 123. Installing the system board
Step 2. Slide the system board forward until it stops.
208
ThinkSystem SR850 V2 Maintenance Manual
To Next Page
Loading...
