Table 80. Memory mirroring with three processors (Processors 1 and 2, 25 to 36 total DIMMs installed in server)
Total Processor 1 Processor 2 Total
DIMMs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 DIMMs
25 1 3 5 7 8 9 10 11 12 15 16 17 28 19 20 21 22 25
26 1 3 5 7 8 9 10 11 12 13 15 17 19 20 21 22 23 24 26
27 1 3 5 7 8 9 10 11 12 13 15 17 19 20 21 22 23 24 27
28 1 2 3 4 5 6 7 8 9 10 11 12 15 16 17 18 19 20 21 22 28
29 1 2 3 4 5 6 7 8 9 10 11 12 13 15 17 19 20 21 22 23 24 29
30 1 2 3 4 5 6 7 8 9 10 11 12 13 15 17 19 20 21 22 23 24 30
31 31 DIMM memory mirroring configuration is not
supported.
31 DIMM memory mirroring configuration is not
supported.
31
32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 32
33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 33
34 34 DIMM memory mirroring configuration is not
supported.
34 DIMM memory mirroring configuration is not
supported.
34
35 35 DIMM memory mirroring configuration is not
supported.
35 DIMM memory mirroring configuration is not
supported.
35
36 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 36
Related DIMM population sequences for three processor systems:
• Processor 1 and 2 DIMM population sequences for 6 to 24 DIMMs, see Table 79 “Memory mirroring with
three processors (Processors 1 and 2, 6 to 24 total DIMMs installed in server)” on page 102.
• To continue populating processor 3 for a system with 25 to 36 DIMMs, see Table 82 “Memory mirroring
with three processors (Processor 3, 25 to 36 total DIMMs installed in server)” on page 105.
Chapter 3. Server hardware setup 103
To Next Page
Loading...
