Lenovo ThinkSystem SR950 - Parts List

Table 42. Cable routing, NVMe drive cables (upper tray)
Cable
Routing
1 Drive backplane 6 NVMe
• From:
– Lower system board in upper compute tray, “PCIe/NVMe” connector (see
“System-board connectors” on page 283)
– Storage-board assembly in upper tray, “NVMe” connector (see “Storage-board-
assembly connectors” on page 284)
• To: Drive backplane 6, connector “NVMe” (see “Drive backplane connectors” on
page 291)
2 Drive backplane 5 NVMe
• From:
– Upper system board in upper compute tray, “NVMe” connector (see “System-
board connectors” on page 283)
– Storage-board assembly in upper tray, “NVMe” connector (see “Storage-board-
assembly connectors” on page 284)
• To: Drive backplane 5, connector “NVMe” (see “Drive backplane connectors” on
page 291)
3 Drive backplane 4 NVMe
• From:
– Upper system board in upper compute tray, “NVMe” connector (see “System-
board connectors” on page 283)
– Storage-board assembly in upper tray, “NVMe” connector (see “Storage-board-
assembly connectors” on page 284)
• To: Drive backplane 4, connector “NVMe” (see “Drive backplane connectors” on
page 291)
Parts list
Use the parts list to identify each of the components that are available for this server.
For more information about ordering the parts shown in Figure 22 “Server components” on page 51:
http://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/sr950/7X12/parts
Note: Depending on the model, your server might look slightly different from the illustration.
50
ThinkSystem SR950 Setup Guide