Table 1. Server Specifications (continued)
Specification
Description
Acoustical noise emissions
(base configuration)
• Sound power level, idling:
– Minimum configuration: 7.0 bels
– Typical configuration: 7.0 bels
– Maximum configuration: 7.8 bels
• Sound power level, operating:
– Minimum configuration: 7.0 bels
– Typical configuration: 7.2 bels
– Maximum configuration: 8.0 bels
Notes:
1. These levels were measured in controlled acoustical environments according to
procedures specified by ISO 7779 and are reported in accordance with ISO
9296.
2. The options supported in this server vary in function, power consumption, and
required cooling. Any increase in cooling required by these options will increase
the fan speed and generated sound level. The actual sound pressure levels
measured in your installation depend upon a variety of factors, including: the
number of racks in the installation; the size, materials, and configuration of the
room; the noise levels of other equipment; the room ambient temperature and
barometric pressure; and the location of employees in relation to the equipment.
Heat output Approximate heat output:
• Minimum configuration: 935 BTU, 275 W (in BTU per hour and watts)
– Minimum configuration of two microprocessors, two memory modules, one M.2
adapter, and no PCIe adapters.
• Maximum configuration: 21837 BTU, 6400 W (in BTU per hour and watts)
– Maximum configuration with four 1600-watt power supplies configured for non-
redundant operation under maximum loading.
8 ThinkSystem SR950 Setup Guide
To Next Page
Loading...
