Lenovo ThinkSystem SR950 - Page 205

DCPMM Installation order: Memory mode with two processors
When implementing Memory mode, any supported DIMMs in any capacity can be installed.
When two processors are installed in the server:
• Processors 1 and 2 are installed in the lower system board of the lower compute tray.
Several configurations are supported with implementing Memory mode with two processors:
• 6 DCPMMs/6 DRAM DIMMs per processor
• 4 DCPMMs/6 DRAM DIMMs per processor
• 2 DCPMMs/6 DRAM DIMMs per processor
• 2 DCPMMs/4 DRAM DIMMs per processor
6 DCPMMs/ 6 DRAM DIMMs per processor
Table 196. Memory mode with 6 DCPMMs and 6 DRAM DIMMs per processor (2 processors)
In the table below:
• P = DCPMM
• D = DRAM DIMM
Processor 1 Processor 2
1
2 3
4 5
6
7
8 9 10
11
12 13
14 15
16
17
18 19 20 21 22 23 24
D P D P D P P D P D P D D P D P D P P D P D P D
4 DCPMMs/ 6 DRAM DIMMs per processor
Table 197. Memory mode with 4 DCPMMs and 6 DRAM DIMMs per processor (2 processors)
In the table below:
• P = DCPMM
• D = DRAM DIMM
Processor 1 Processor 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
D D P D P P D P D D D D P D P P D P D D
2 DCPMMs/ 8 DRAM DIMMs per processor
Table 198. Memory mode with 2 DCPMMs and 8 DRAM DIMMs per processor (2 processors)
In the table below:
• P = DCPMM
• D = DRAM DIMM
Processor 1 Processor 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
P D D D D D D D D P P D D D D D D D D P
Chapter 3. Server hardware setup 201