If you are instructed to return the memory air baffle, follow all packaging instructions and use any packaging
materials that are provided.
Install a memory air baffle
Memory air baffles are in the system boards that are accessed from the front of the server.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
“
” on page 56 “ ” on page 254 “
” on page 57
CAUTION:
Make sure that all server power cords are disconnected from their power sources before performing
this procedure.
Complete the following steps to install a memory air baffle:
Watch the procedure. A video of the installation process is available:
•
YouTube
• Youku
Appendix B. Component reference 351
To Next Page
Loading...
