Figure 122. Storage tray removal to stop position
Step 1. Press the button on each release lever; then, simultaneously rotate the release levers until they are
perpendicular to the chassis.
Step 2. Pull storage tray forward evenly until it stops; then, close the release levers.
Step 3. Press the release tabs on either side of the tray; then, slide the tray fully forward evenly and remove
it from the chassis.
Attention:
• Be prepared to support the full weight of the storage tray when you remove it from the chassis.
• Do not use the release levers as handles to support the storage tray.
Figure 123. Storage tray removal from chassis
376 ThinkSystem SR950 Setup Guide
To Next Page