Table 51. Independent mode with four processors (Processors 3 and 4, 4 to 24 total DIMMs installed in server)
Total Processor 3 Processor 4 Total
DIMMs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 DIMMs
4 8 20 4
5 8 20 5
6 8 20 6
7 5 8 20 7
8
5 8 17 20 8
9
5 8 17 20 9
10
5 8 17 20 10
11 5 8 10 17 20 11
12 5 8 10 17 20 22 12
13 5 8 10 17 20 22 13
14 5 8 10 17 20 22 14
15 3 5 8 10 17 20 22 15
16 3 5 8 10 15 17 20 22 16
17 3 5 8 10 15 17 20 22 17
18 3 5 8 10 15 17 20 22 18
19 3 5 8 10 12 15 17 20 22 19
20 3 5 8 10 12 15 17 20 22 24 20
21 3 5 8 10 12 15 17 20 22 24 21
22 3 5 8 10 12 15 17 20 22 24 22
23 1 3 5 8 10 12 15 17 20 22 24 23
24 1 3 5 8 10 12 13 15 17 20 22 24 24
Related DIMM population sequences for four processor systems:
• Processor 3 and 4 DIMM population sequences for systems with 25 to 48 DIMMs, see Table 52
“Independent mode with four processors (Processors 3 and 4, 25 to 48 total DIMMs installed in server)”
on page 72.
• To continue populating processor 1 and 2 DIMMs for a system with 4 to 24 DIMMs, see Table 49
“Independent mode with four processors (Processors 1 and 2, 4 to 24 total DIMMs installed in server)” on
page 69.
Chapter 3. Server hardware setup 71