Preface and general information
1-2
48XX/49XXSHB0399
1.3 48XX/49XX controller
1.3.1 Labelling
- Lenze 48XX/49XX controllers are unambiguously designated by the
contents of the nameplate.
- CE mark:
- Conformity with the Low-Voltage Directive
- Conformity with the EMC Directive
- Manufacturer
-LenzeGmbH&CoKG
Postfach 101352
D-31763 Hameln
1.3.2 Application as directed
48XX/49XX controllers
- must only be operated under the conditions prescribed in these
Instructions.
- are components
- for open-loop and closed-loop control of variable speed drives with
separately excited DC motors.
- to be installed into a machine.
- used for assemblies together with other components to form a machine.
- should not be driven together with other DC motors, such as shunt motors
or separately excited motors with a stabilizing series winding, before you
have contacted Lenze.
- are electric units for the installation into control cabinets or similar enclosed
operating housings.
- are not to be used as domestic appliances, but only for industrial purposes.
Drive systems with 48XX/49XX controllers
- comply with the EMC Directive, if they are installed according to the
guidelines for CE-typical drive systems.
- can be used
- on public and non-public mains.
- in industrial premises.
The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed inappropriate!
To Next Page
Loading...
